Specifications and features – Lectrosonics UH100 User Manual
Page 8
SPECIFICATIONS AND FEATURES
Operating frequencies:
537.6 to 588.7 MHz, 614.4 to 793.5 MHz
Frequency selection:
256 frequencies in 100kHz steps
RF Power output:
100 mW (nominal)
Frequency stability:
± 0.002%
Deviation:
± 20 kHz (max)
Spurious radiation:
90 dB below carrier at frequencies less than 1GHz
Equivalent input noise:
-126 dBV
Input level:
Nominal 2 mV to 300 mV, before limiting.
Input greater than 2V, with limiting.
Input impedance:
1K Ohm mic load impedance
Input compressor:
Soft compressor, >30 dB range
Gain control range:
43 dB; semi-log rotary control
Modulation indicators:
Dual LEDs indicate modulation level 12 dB below limiting and at
the onset of limiting.
Controls:
2-position “OFF-ON” slide switch. Control panel knob adjusts audio
gain. Rotary switches on side panel adjust transmitter frequency.
Audio Input Jack:
3-Pin XLR
Battery:
Precision compartment auto-adjusts to accept any known alkaline
or lithium 9 Volt battery. (We’ve tried 150 different ones!)
Battery Life:
5 Hours with alkaline 9 Volt, 12 hrs with lithium
Weight:
6.6 ozs. including battery
Dimensions:
1.5 x 1.5 x 4.2 inches
Emission Designator:
180KF3E
Specifications subject to change without notice.
8