Lectrosonics UH400a - Manual (Page 2)

UH400A/UH400TM
This plug-on transmitter is an advanced design that
has evolved since the first models appeared in the late
1980’s serving ENG applications at television stations
across the USA. In the mid-1990’s, the first UHF ver­
sions became available and the use of plug-on transmit­
ters in motion picture production increased significantly.
The current UH400A model has evolved to include
every improvement and feature developed since the first
model was introduced.
The UH400A is a rugged, machined aluminum pack­
age with selectable phantom power for use with a wide
variety of microphones. LEDs located on the top panel
make quick and accurate level settings without having
to view the receiver. The battery compartment accepts
any 9 volt alkaline, LiPolymer or lithium battery and
makes a positive connection via self-adjusting contacts.
The UH400TM is a specialized version of the UH400A
that is an integral part of a highly accurate wireless test
and measurement system.
Only the UH400A and UH400TM transmitters are cov­
ered in this manual. Companion receivers are covered
in separate manuals. The UH400A and UH400TM will
operate with any 100 Series, 200 Series, 400 Series,
IFB Lectrosonics receiver in the same frequency group,
or selected analog receivers from other manufacturers
operating in the same frequency range. (Contact fac­
tory for details.)
LECTROSONICS, INC. 2