Lectrosonics UM250c - Manual (Page 9)

UHF Belt-Pack Transmitter
MICROPHONE CORD TERMINATION
1
2 3
4
5
VIEW FROM SOLDER
SIDE OF PINS
0.3"
0.15" Heatshrink
Tubing
TA5F Connector Assembly
Mic Cord Stripping Instructions
Caution!
Do not allow the shield wire to touch any
metal part of the connector shell.
The shield wire is the antenna on VHF
models and poor operating range will result.
Shield Wire
Crimp
Tabs
Rubber
Insulation Crimp
Tabs Rubber
Insulation
Note
This termination is required on VHF transmitters and will still work fine on UHF transmitters.
Rio Rancho, NM – USA
9