Lectrosonics VS1 - Manual (Page 6)

FRONT PANEL DESCRIPTION
SELECT PUSHBUTTON - Selects the area on the LCD display for which the Up and Down pushbuttons are active.
The blinking cursor will be placed in the selected area. The first line of the display is the name of the selected
function. The second line of the display shows the selected channel, and also the current value of the selected
function.
UP and DOWN PUSHBUTTONS - Allows the VS1 to be cycled through its function options, as well as enabling the
function values to be changed.
SAVE PUSHBUTTON - Allows the current value of the selected function to be saved to permanent memory.
ACTIVE OUTPUT LEDS - Indicate which logic output(s) are currently active.
POWER LED - Indicates the presence of AC power to the DC1.
POWER SWITCH - Turns the VS1 on or off.
Figure 3 - VS1 Front Panel
REAR PANEL DESCRIPTION
LOGIC OUTPUT CONNECTORS - provide an isolated activation signal, suitable for interface with a video switcher.
LOGIC INPUT CONNECTORS - provide a means by which logic outputs from another source (like an automatic
mixer) may be connected to the VS1.
75 OHM SYNC INPUT - provides an input to accept the system synchronization signal (if one is present) to allow
the VS1 to initiate camera switching only during the vertical retrace interval.
Figure 4 - VS1 Rear Panel
6