Lectrosonics T1 - Manual (Page 4)

T1
Introduction
Thank you for selecting the Lectrosonics frequency
agile, narrowband, T1 IFB (Interruptible Foldback)
transmitter. The T1 is the result of over 80 years of
engineering experience with the very latest compo­
nents, in a design that addresses the most demanding
professional applications.
The Lectrosonics T1 IFB Transmitter along with the
companion R1 or R1a IFB Receivers allow on-air talent
to monitor program audio and receive cues from
directors and other production personnel.
The design of the T1 IFB Transmitter was the direct
result of numerous conversations with users, production
personnel and dealers across the US. The specific
concerns and needs brought up in these conversations
led directly to the development of the operational
features offered on the T1. Two hundred fifty six fre­
quencies are user selectable in 100 kHz steps to
alleviate interference problems in travelling venues.
The T1 IFB Transmitter is a rugged, machined alumi­
num package. The input section is adjustable for
virtually any microphone or line level audio source.
Level indicating LEDs are provided on the control panel
to make level settings quick and accurate, without
having to view the receiver. The antenna is a detach­
able, locking 1/4 wavelength flexible bronze cable that
connects to a 50 Ohm BNC connector on the transmitter.
Only the T1 IFB Transmitter is covered in this manual.
Companion receivers are covered in separate manuals.
The T1 IFB Transmitter will operate with any
Lectrosonics R1 or R1a IFB Receiver in the same
frequency group.
LECTROSONICS, INC. 4