Quad195/d, Service and repair – Lectrosonics QUAD195D User Manual
Page 8
8
QUAD195/D
RF Gain:
1.5 dB
RF Output:
Four outputs, 50 Ohm, BNC
Filtering:
Two section helical resonator
Third Order Intercept:
+25 dBm
Power Input:
12 to 20 Vdc (either polarity)
Pins 1 and 4 on XLR power jack
CH-50 adapter for AC operation
14 to 20 Vac, 50/60 Hz, 1/2 Amp
Pins 2 and 3 on XLR power jack
16 to 22 Vdc 1/2 Amp
Power Consumption:
45 mA (plus 55 mA for each CR187 receiver)
Total 265 mA
Connectors:
RF: BNC
POWER INPUT: 4 pin XLR (Switchcraft D4M)
POWER OUTPUT: 2.5mm power jack
A/D Electronics part # ADC-014
Short Circuit Protection:
Auto-reset thermal fuses (6)
MECHANICAL ASSEMBLY
Construction:
Machined aluminum panels, housings, and mechanical parts.
Dimensions:
6 x 8 x 9 inches (in carrying case)
Weight:
14.25 lbs including 4 CR187 receivers
Batteries:
Two 6V, 4.8 Ah rechargeable gel-cells
Panasonic LCR-456-P
Operating Time per Charge:
14.5 Hours
Specifications subject to change without notice.
SERVICE AND REPAIR
If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment
needs repair. Make sure you have followed the setup procedure and operating instructions. Check out the intercon
necting cords and then go through the TROUBLE SHOOTING section in the manual