Liquid Controls HML4-F1 - LCMag - Manual (Page 13)

HML4-F1
13
0-1.5 V
3-40 V
AUTOCALIB. OFF
T
RESET
0-1.5 V
3-40 V
Tmin = 100ms
BLOCK
0-1.5 V
3-40 V
T
0-1.5 V
3-40 V
INPUT OPERATION STAGE (GENERIC FUNCTIONS)
Auto-calibration
Reset totalizers
Block totalizers
Block totalizers
Totalizers active
Necessary conditions for enable the function
Necessary conditions for enable the function
Necessary conditions for enable the function
Tmin<T<1sec. = autocalibration
T > 1 sec. = Autozero
POS. 5.5 ENABLED
POS. 5.7-8-9 batch functions assign to input 1-2-3
(optional) DISABLED
(op
POS. 6.1-2-3-4 batch functions assign to output 1-2-
3-4 DISABLED
POS. 5.1-2 ENABLED at least one
POS. 5.4 ENABLED
POS. 9.5 (auto-batch) DISABLED
POS. 9.7 (cons. mode) DISABLED
POS. 5.6 ENABLE
POS. 5.7 (batch on input 1) DISABLED
POS. 5.8-9 batch functions assign to input 2-3
(optional) DISABLED
‰
Necessary conditions for enable the function
Range change
THE FUNCTIONS POINT OUT ABOVE ARE ENABLED ONLY ON INPUT 1
Scale 2
Scale 1