Liquid Controls Back Check Valves A2885 & A2883 LPG, A2882 Refined Fuels - Manual (Page 2)

2
Table of ConTenTs
InTroduCTIon
Safety Procedures ................................................... 2
General Information ................................................. 3
a2885 & a2883 (lPG)
New Installations ...................................................... 3
Retrofit Installations and Maintenance .................... 4
Disassembly ..................................................................... 4
Reassembly ..................................................................... 4
a2882 (refIned fuels)
New Installations ...................................................... 5
Retrofit Installations and Maintenance .................... 5
Disassembly ..................................................................... 5
Reassembly ..................................................................... 5
bIll of MaTerIals
A2885 & A2883 (LPG) .............................................. 6
A2882 (Refined Fuels) ............................................. 7
The most current English versions of all Liquid Controls publications are available on our web site, www.lcmeter.com. It is the
responsibility of the local distributor to provide the most current version of LC manuals, instructions, and specification sheets in
the required language of the country, or the language of the end user to which the products are shipping. If there are questions
about the language of any LC manuals, instructions, or specification sheets, please contact your local distributor.
Publication updates and Translations
! WarnInG
• Before using this product, read and understand the instructions.
• All work must be performed by qualified personnel trained in the proper application, installation, and maintenance
of equipment and/or systems in accordance with all applicable codes and ordinances.
• When handling electronic components and boards, always use proper Electrostatic Discharge (ESD) equipment
and follow the proper procedures
• Make sure that all necessary safety precautions have been taken.
• Provide for proper ventilation, temperature control, fire prevention, evacuation, and fire management.
• Provide easy access to the appropriate fire extinguishers for your product.
• Consult with your local fire department, state, and local codes to ensure adequate preparation.
• Read this manual as well as all the literature provided in your owner’s packet.
• Save these instructions for future reference.
• Failure to follow the instructions set forth in this publication could result in property damage, personal injury, or
death from fire and/or explosion, or other hazards that may be associated with this type of equipment.
be Prepared
Before disassembly of any meter or accessory component:
ALL INTERNAL PRESSURES MUST BE RELIEVED AND ALL LIQUID DRAINED FROM
THE SYSTEM IN ACCORDANCE WITH ALL APPLICABLE PROCEDURES.
-Pressure must be 0 (zero) psi.
-Close all liquid and vapor lines between the meter and liquid source.
For Safety Rules Regarding LPG, refer to NFPA Pamphlet 58 and local authorities.
Failure to follow this warning could result in property damage, personal injury, or death from fire and/or explosion, or other
hazards that may be associated with this type of equipment.
! WarnInG
safely evacuate
Piping system