Liquid Controls WinHost Operation - Manual (Page 25)

25
Configure LCR - System Calibration
RTD Slope, RTD Offset, Last Calibration, Calibration Number, Calibration Event,
Configuration Event
RTD Slope and RTD Offset are used for factory calibra-
tion of the LectroCount and are not editable.
The calibration information fields of Calib, Calib Num-
ber, Calib Event, and Config Event are for metrology
use and are not editable.
Last Calibration: Displays the date and time of the last
calibration.
Calibration Number: Displays the number of times the
LectroCount has been placed in the calibration mode
using the red selector switch.
Calibration Event: Displays the number of times the cali-
bration information has been changed.
Configuration Event: Displays the number of times the
configuration has been changed.