Luna Optics LN-ERS30M - Manual (Page 5)

5 – Reticle Color Button
6 – Mounting Screws
7 – Distance Focusing Wheel
8 – Accessory (IR illuminator) Mounting Plate
9 – Windage & Elevation Adjustment Turrets
INSTALLING THE BATTERY:
Your night vision unit operates on one 3V Lithium battery. To install the
battery, remove the Battery Compartment Cover (4). Install the battery
according to the diagram indicated on the compartment. Once the battery
is inside, replace the cover.
TURNING THE UNIT ON AND OFF:
Your night vision unit has a simple and convenient Power Switch (3),
which combines the function of turning the unit ON and adjusting the
sighting mark (Reticle) illumination brightness. To turn the unit ON, first
flip the Protective Lens Cover up (ONLY IN THE DARK!) and rotate the
Power Switch (3) clockwise one dial to ON position. Look through the
rubber Eyecup (2) – you should see the green glow. Even if the image is
not yet sharp, the unit is operating. To turn the unit OFF, flip the power
switch one dial back to the OFF position. The green glow will disappear
immediately indicating the unit is in OFF mode. Always replace the
protective lens cover after the unit is turned off and no longer is in use.
FOCUSING THE UNIT:
To obtain the sharp image, you must first rotate the Ocular Focusing Ring
(1) in either direction, until you notice in which position the image is at its
best. After that, rotate the Distance Focusing Wheel (7) also until the
image is at its best. You may have to repeat the process again, until the
image is sharp and clear. Once the clear image is obtained, you no longer
need to adjust the Ocular Focusing Ring, just rotate the Distance Focusing
Wheel to adjust the distance to the object you are viewing.
OPTIONAL INFRARED ILLUMINATOR:
The LN-ERS30M scope features an Image Intensifier Tube of Generation-
2+, which has enough light sensitivity to function outdoors without the
help of the Infrared Illuminator. It may however be beneficiary to
purchase an extended range IR illuminator for long distance shooting or
small game hunting. Infrared Illuminator will provide an additional beam
of light invisible to the naked eye and is especially useful in very dark
conditions allowing you to better identify the target and also see what is
behind the target. Mounting the optional IR illuminator is easy and takes
only seconds, as the scope has a special accessory mount (8) already
built-in.