Lightronics FXELP10 (during-after May 2009) - Manual

PROFILE SPOT575 OWNERS MANUAL Page 1 of 4
Ellipsoidal Lighting Fixture Version 20101007
INTRODUCTION
Thank you for purchasing the Profile Spot 575 lighting
fixture. This manual contains important information
about safe installation and use of this fixture. Please read
and follow these instructions carefully and keep this
manual for future reference.
The Profile Spot 575 is suitable for stage, disco, night club,
and other artistic applications.
The housing is a high quality aluminum alloy with an
insulating paint finish.
The
Profile Spot 575 includes a gel filter holder. A size
"B" gobo holder is also provided.
The product complies with CE norms and standards and is
certified to UL 1573 by MET Laboratories.
MODELS
The Profile Spot 575 is provided as one of five beam
width models (10º, 19º, 26º, 36º, and 50º).
Each model is available in either black or white color.
Lens tubes are interchangeable between models and are
marked with the beam width.
The 10º model has a larger lens tube which is
packaged separately from the main housing.
INSTALLATION
CAUTION RISK OF FIRE
The fixture must be located a minimum
of 1.5 meters from flammable objects.
The fixture is for
INDOOR USE ONLY . Use only in dry
locations. Keep this device away from moisture,
excessive heat, humidity, and dust.
The fixture must be installed in a location with
adequate ventilation, at least 1.5 meters from adjacent
surfaces. Do not allow vent holes to be blocked.
Use a safety cable when installing this fixture. They
are inexpensive and easy to use.
LENS TUBE
BARREL
REFLECTOR
HOUSING
LAMP HOUSING
YOKE
POWER
CABLE
"B" GOBO HOLDER
5.375"
GEL HOLDER
FOCUS KNOB