Lightronics AS40M User Manual
Page 3
Page 3 of 5
AS - 40M COMPACT DMX/MANUAL DIMMER
Revision 2.0
02/14/2005
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
Tel: 757 486 3588
OWNERS MANUAL
CHASER MODE SWITCH FUNCTIONS
SWITCHES STEP
TIME (Duration)
0.5
seconds
1.0
seconds
2
seconds
4
seconds
8
seconds
16
seconds
32
seconds
64
seconds
SWITCHES PATTERN
4
channel
sequence
4 channel build
4 channel build/unbuild
4 channel random
3 channel sequence
+
3 channel build
3 channel build/unbuild
2 channel alternating
UP FOR BOUNCE
(DOWN = DIM, UP = RELAY)
1/2 DIM/RELAY
3/4 DIM/RELAY
NORMAL/CHASER
(UP FOR CHASER)
MANUAL OPERATION
The AS-40M can be operated by itself as a manually controlled dimmer. If there is no DMX signal present and
the unit is not in the chaser mode then each channel can be controlled by one of the four rotary faders on the unit
top cover. The faders are marked as to channel number. Rotating any fader clockwise will increase the intensity
of the channel.
MAINTENANCE AND REPAIR
TROUBLESHOOTING
• Check the DMX control cable.
• Check the settings of the dimmer DIP switches.
• Check the console setup for correct patching.
• Check that you have power applied to the dimmer.
• Check that all light fixtures are functional.
• Check the fuses.
REPAIR
The only user serviceable parts are externally accessible fuses. Replace fuses ONLY with 5 Amp, 250VAC, fast
blow fuses. Internal service on the unit by other than Lightronics authorized agents will void the warranty. If
service is required, contact the dealer from whom you purchased the dimmer, or Lightronics, Service
Department, 509 Central Drive, Virginia Beach, VA 23454. Tel: 757 486 3588.