Lightronics SM192 - Manual (Page 8)

INSTRUCTION MANUAL
Page 8 of 9
SM - 192 DMX LIGHTING CONTROLLER Version 20090519
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 757 486 3588
CHASE MUSIC AUTO-RUN
The SM-192 has an internal microphone which can be
used to Auto-Run chases with music synchronization.
1. Select a chase (1 - 6) by pushing the applicable
CHASE button. You can select more than one.
2. Push MUSIC/BANK COPY. The MUSIC
TRIGGER indicator on the display will light.
and Music Auto-Run will begin.
3. Push AUTO/DEL to stop chase music Auto-Run.
The display indicator in the display will go OFF.
MIDI OPERATIONS
MIDI CONTROL ACTIVATION
1. Hold down MIDI/ADD for about 3 seconds. The
third and fourth digits of the display will begin to
flash indicating that MIDI Control is ON and will
show the current MIDI channel.
MIDI Control is turned OFF by the same procedure.
MIDI CHANNEL SELECTION
You can change the MIDI channel (1 - 16) when MIDI
Control is ON using BANK UP and BANK DOWN.
MIDI RUN
The SM-192 uses MIDI "NOTE ON" commands to
execute scene and chase function. You might have to
transpose a MIDI keyboard to send the correct notes.
The table below shows the SM-192 functions which
can be controlled by MIDI.
MIDI NOTE FUNCTION
00 - 07 Bank 1 Scenes 1 - 8 ON/OFF
08 - 15 Bank 2 Scenes 1 - 8 ON/OFF
16 - 23 Bank 3 Scenes 1 - 8 ON/OFF
24 - 31 Bank 4 Scenes 1 - 8 ON/OFF
32 - 39 Bank 5 Scenes 1 - 8 ON/OFF
40 - 47 Bank 6 Scenes 1 - 8 ON/OFF
48 - 55 Bank 7 Scenes 1 - 8 ON/OFF
56 - 63 Bank 8 Scenes 1 - 8 ON/OFF
64 - 71 Bank 9 Scenes 1 - 8 ON/OFF
72 - 79 Bank 10 Scenes 1 - 8 ON/OFF
80 - 87 Bank 11 Scenes 1 - 8 ON/OFF
88 - 95 Bank 12 Scenes 1 - 8 ON/OFF
96 - 103 Bank 13 Scenes 1 - 8 ON/OFF
104 - 111 Bank 14 Scenes 1 - 8 ON/OFF
112 - 119 Bank 15 Scenes 1 - 8 ON/OFF
120 - 125 CHASES 1 - 6 ON/OFF
126 BLACKOUT