Magnum Venus Plastech INNOVATOR II CONTROL UNIT - Manual (Page 23)

INSTALATION/OPERATIONS MANUAL
INNOVATOR II
MAGNUM VENUS PLASTECH REV 1.40
MAY 2012 PAGE 23
CHAPTER 5-Control box configuration (Internal controls)
The user can adjust the flush timer duration, the MPG response time and RGA stroke timer and alarm volume. The
procedures for doing this are described in the following sub-sections. Use the air circuit for your machine controls to
identify the location of the components that require adjustment.
Many components in the control box are labeled to aid identification and therefore locating items that may require
adjustment should be relatively straight forward with the aid of a circuit diagram.
The internals of a typical Innovator control box are shown in figures 5.10.Some components have been marked for
illustrative purposes; however it must be emphasized that the appropriate air circuit should always be used as the
definitive reference.
FIG 5.10
FLUSH TIMER
FLOW CONTROL BANK VALVE BANK #3
EXTERNAL CONNECTIONS
RGA RESET BUTTON
PULSE VAVLE
VALVE BANK #1
VALVE BANK #2
VALVE BANK #4
VALVE BANK #3