Attwood 66319 User Manual

Page 2

Advertising
background image

WIRING INSTRUCTIONS
The power source must be 12-volt DC ONLY. Use marine grade
wire connectors only. Protect all connections with suitable materials.

NOTE: Failure to make proper connections and fuse the light
properly will void the product warranty.

1. Connect one terminal to the negative ( - ) post of the 12-volt

battery. Connect the other terminal to the positive ( + ) lead
through a 2-amp fuse and suitable dash-mounted switch.
(See Figure 4.)

SAVE THESE INSTRUCTIONS

ATTWOOD LIMITED WARRANTY Attwood Corporation, 1016 North
Monroe, Lowell, Michigan 49331 (“Attwood”) warrants to the original
consumer purchaser that Attwood brand products will be free from defects
in materials and workmanship under normal use and service for one year
from the date of original consumer purchases.

This limited warranty is not applicable if the product has been damaged
by accident, improper installation, unreasonable or improper use, lack
of proper maintenance, unauthorized repairs or modifications, normal
wear and tear, or other causes not arising out of defects in materials or
workmanship.

Attwood products are warranted for use on pleasure boats. Any other use—
including but not limited to commercial, racing, or non-marine use—are not
covered under this warranty. Attwood’s obligation under this warranty is
limited to repair of the product at Attwood’s plant or replacement of the
products at Attwood’s option without expense to the original consumer
purchaser. Any expenses involved in the removal, reinstallation or transportation
of the product are not covered by this warranty.

The product must be returned to Attwood’s plant at the address above,
postage pre-paid, and insured with proof of original purchase including date.

If Attwood is unable to replace the product and repair is not commercially
practical or cannot be timely made, or if the original consumer purchaser is
willing to accept a refund in lieu of repair or replacement, Attwood may
refund the purchase price, less an amount for depreciation. The acceptance
by Attwood of any product returned or any refund provided by Attwood shall
not be deemed an admission that the product is defective or in violation of
any warranty. Products that are replaced or for which a refund is issued
become the property of Attwood.

This warranty is Attwood’s only expressed warranty of these products. No
implied warranty including, without limitation, the implied warranties of
merchantability and fitness for a particular purpose, shall be extended
beyond the warranty period stated above for each product. Attwood shall
not be liable for any damages, for loss of use of this product, nor for any
other incidental or consequential damages, costs, or expenses.

Some states do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the
above limitations and exclusions may not apply to you. This warranty gives
you specific legal rights, and you may have other rights which vary from
state to state.

2. Test lights for proper operation from dash-mounted control switch.

MAINTENANCE
Replace bulb, when necessary, with standard 8-watt automotive
festoon type (Attwood #9231).

Figure 4

Switch

2-Amp

Fuse

© 2003 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com

Advertising
This manual is related to the following products: