Magnum Venus Plastech Megaject MKIV Revision 1_2 User Manual

Page 30

Advertising
background image

Megaject MK IV Issue 1_2 25/11/2003

Page 30 of 31

Resin Heaters

Important Note


It is essential that resin heaters are not left turned on with stationary resin in the system.

Uncatalysed resin will eventually cure at elevated temperatures and block the heater
channels..


Whilst the resin heater is on, the machine MUST be either recirculating or injecting.

At the end of a shift, turn off the resin heater and continue to recirculate the machine until
the resin has cooled to room temperature. It is then safe to turn off the machine.


Advertising