Magnum Venus Plastech ATG chopper Gun - Manual (Page 17)

ATC Chopper Gun Manual
Rev. 11/2012 Page | 17
Cylinder Repair
21. Remove and check the spring from inside the cylinder.
22. Check the inside of the cylinder.
23. Check and clear air ports on the bottom of the cylinder.
24. Remove chopper air fitting from the back of the cylinder.
25. Push out the chopper air poppet valve and spring from the inside of the cylinder.
26. Replace the o-rings on the chopper poppet valve.
27. Lubricate (SSL-10) the inside of the cylinder and chopper poppet valve.
28. Push the chopper poppet valve and spring into the back on of the cylinder.
29. Replace the o-ring on the chopper air fitting.
30. Reinstall the chopper air fitting.
31. Push the end of the poppet valve from the inside of the cylinder to check that
it is moving freely.
32. Reinstall spring into the cylinder.