Luminex IS 2.3 to xPONENT 3.1 Rev 2 Upgrade Instructions - Manual (Page 9)

Luminex IS Version 2.3 Upgrade Instructions to xPONENT 3.1 Rev 2 - For In Vitro Diagnostic Use
5
6. In the Save As dialog box that opens, select the folder where you
want to export the lot as the Save-in location.
7. Enter a name for the exported lot into the File Name box.
8. Click Save.
To export a batch file:
1. On the File menu, click Export Batch Data. The Open Batch
dialog box opens.
2. Select the batch you want to export.
3. Click Select. The Export Batch dialog box opens, displaying the
name and location of the exported file.
4. Click OK.
To export a template file:
1. On the Developer Workbench toolbar, click Export Template.
The Export Template dialog box opens listing the available tem-
plates.
2. Select the template to export and click Export. The Template
Saved dialog box opens, displaying the name and location of the
exported file.
3. Click OK.
Back Up Luminex IS
Version 2.3 Database
You can import data into xPONENT 3.1 from IS 2.3; first, back up
the database.
To back up your Luminex IS Version 2.3 database before removing
the Luminex IS Version 2.3 software:
1. Launch the Luminex IS Version 2.3 software.
2. On the Tools menu, click Database Backup. The Backup
Database To. . . dialog box opens.
3. Choose the folder name and location for the database to back up
and click Save. The database is backed up and the Backup
Database To. . . dialog box closes. Close the software.
Install New PC
To install the new PC:
1. Close all applications. Perform a complete system shutdown.
Turn the power off and unplug the Luminex analyzer, Luminex
XYP, and PC.
2. Remove all connections from the old PC. Remove the old PC
and set it aside. Set the new PC in place.
3. Connect the keyboard and mouse to an available USB port and
bar code reader, if present, to an available USB or PS2 port.
4. Connect the Luminex XYP serial cable to the back of the XYP
and the computer serial port.
Note: If you are moving to a
new PC, copy the backed up
database to a CD or other
external storage so that you
can download them to your
new PC.
Note: If you did not get a new
PC with your xPONENT 3.1
upgrade, skip this step.