Luminex xPONENT 3.0 to xPONENT 3.1 Rev 2 Upgrade Instructions - Manual (Page 7)

3
Upgrade Kit Contents
These items come with all upgrade kits:
• Installation CD for xPONENT 3.1 SP1, including Release Notes. This also includes a
series of links to Luminex services: General contact information, manuals (PDF format),
training (xMAP University), support, and field service. If your PC is not connected to the
internet, only the installation and Release Notes links are active.
• Automated Maintenance Plate (AMP)
• LX100/200 Calibration Kit
• LX100/200 Performance Verification Kit
NOTE: For information about calibration and verification frequency and
procedures, see Luminex xPONENT 3.1 Software Manual.
• Luminex xPONENT 3.0 Upgrade Instructions to xPONENT 3.1 SP1
• Luminex xPONENT 3.1 Software Manual on CD
These hardware items are part of the upgrade kit only if you purchase them from Luminex:
• PC
• A touchscreen monitor or a flatscreen monitor
These license packages are part of the upgrade kit only if you purchase them from
Luminex:
• 21 CFR Part 11 package
• LIS package
• Automation package
• Security package
• Extra seats package
Performing the Upgrade
Upgrade Procedure Steps
Follow the appropriate series of steps to upgrade to Luminex xPONENT 3.1 SP1:
If you are not upgrading your PC: If you are upgrading your PC:
Archive Files (page 4) Archive Files (page 4)
Uninstall xPONENT 3.0 (page 5) Install new PC (page 4)
Install xPONENT 3.1 SP1 (page 5) Import and Convert files ( page 7)
Import and Convert files ( page 7) Verify firmware (page 8)
Verify firmware (page 8) Obtain license key (page 8)
Obtain license key (page 8)