Luminex IS 2.1_2.2 to xPONENT 3.1 Rev 2 Upgrade Instructions - Manual (Page 15)

Luminex IS Versions 2.1 and 2.2 Upgrade Instructions to xPONENT 3.1 SP1 - For In Vitro Diagnostic Use
11
(item 4 in "LxFirmware Update Tool Dialog Box" on page 8) dis-
plays the XYP firmware version and status. This process may
take up to five minutes. The example above may not match the
dialog box on your system.
5. If the second line indicates that the firmware is up-to-date, then
click Close. No further action is required; continue with step 8. If
an update version is available, continue with step 6.
6. Click Upgrade adjacent to the Movement Device text box. The
Confirm XYP Firmware Download dialog box opens. Click Yes
to continue with the upgrade.
7. The Download In Progress dialog box opens displaying the prog-
ress. Read the information presented on the dialog box. When the
download is finished the Status text box displays Download
Complete. Click OK.
8. Turn the power to the XYP off for 5 seconds, then turn it back on.
9. An entry in the Movement Device text box should read: Firm-
ware is up-to-date. The firmware version is 2.1.15.
Obtain License Key
You must obtain a license key from Luminex Technical Support to
enable the full base package beyond the 90 day trial period. In order
to assign your license key, we will need information about your
Luminex system. Please have the following information available:
•
The serial number of your Luminex system.
• The serial number of your Luminex XYP.
Additionally, we will need information provided in the xPONENT
licensing export file. To create this file:
1. Open the Luminex xPONENT software.
2. Click Admin on the toolbar.
3. Click the Licensing tab.
4. Click Export. This creates a text attachment that can be saved
wherever is convenient for you to retrieve it.
5. Email that attachment to [email protected].
6. When you receive the return email from Luminex Technical Sup-
port, follow the instructions in the email to import the new license
key.