Audiovox GMRS-1545 - Manual (Page 13)

13
To set the Dual Watch Mode:
- From GMRS standby mode, press the MODE button 4 times; the
DW icon flashes on the display. If the dual watch mode is off, the
oF icon will also appear flashing.
- To enable the dual watch mode, press the Up or Down button; the
dual watch channel number will flash and start to increment up or
down as the Up or Down button is pressed.
- Press the MODE button again to select the CTCSS function and
select the CTCSS code if desired for the dual watch channel just
selected.
- Press the PTT button to confirm selection of the dual watch
channel. The display will now alternate between the primary
channel and the dual watch channel just selected.
To exit the dual watch mode, repeat the above procedure, decrementing the
channel number until oF appears; then press the PTT button to confirm.
NOTE:
When in Dual Watch mode, the vibration alert function is
disabled.
Transmit Power Selection Mode
This feature permits selection of the transmitting power level to high or
low. Using low power, the unit will have a lower transmit range but bat-
tery life will be increased.
To access the transmitter power selection function:
- From GMRS standby mode, press the MODE Button 5 times until
the Po icon appears with a flashing HI or Lo indication on the
display.
- Press the Up or Down button to toggle between the HI and Lo
selections.
- Press the PTT button momentarily to confirm selection.
The display will indicate the current setting in GRMS standby mode.