Mallory Ignition Lakewood Safety bellhousing 15210_15220 User Manual
Page 2
PN 97140239
©2000
Cleveland, Ohio
216.688.8300
www.mrgasket.com
SAFETY BLOCKPLATE FASTENER
REQUIREMENTS AND LOCATION
IMPORTANT: All fasteners must be used in their proper location
for the bellhousing to meet S.F.I 6.1 safety requirements.
LAKEWOOD 15210 SERIES FASTENER REQUIREMENTS
Ford 390, 406, 427 & 428
For this product to meet SFI specification 6.1
the fasteners listed below must be used.
A = 1/2 - 13 x 1" GRADE 8 BOLTS, WASHERS & NUTS.
B = BELLHOUSING LOCATING PINS (NOT INCLUDED).
C = 7/16 - 14 x 1" GRADE 8 CAP SCREWS.
D = 3/8 - 16 x 1" GRADE 8 BOLTS, WASHERS & NUTS.
E = GRADE 5 STARTER BOLTS.
LAKEWOOD 15220 SERIES FASTENER REQUIREMENTS
Ford 351M, 400, 429 & 460
For this product to meet SFI specification 6.1
the fasteners listed below must be used.
A = 1/2 - 13 x 1" GRADE 8 BOLTS, WASHERS & NUTS.
B = BELLHOUSING LOCATING PINS (NOT INCLUDED).
C = 7/16 - 14 x 1" GRADE 8 CAP SCREWS.
D = GRADE 5 STARTER BOLTS.
* These holes may not be present in some blocks. If present, their
use is recommended for additional safety.
15741
15729