Acoustic Research ARRX15G - Manual (Page 22)

22 Activities
Once your remote is ready to test, the screen to the right appears.
Carefully disconnect the remote from your PC.
The remote screens guide you through testing this activity.
Read about the test
The first screen gives you some information about the test. Use the toggle bar
to go to the next screen.
IMPORTANT: Make sure all your devices are on before you start.
Test individual power commands
The second screen lets you test the power command you set for each
device. Select the on-screen remote button for each device to see if it turns
that device off. (If it does, make sure you turn it back on!) Only the first
three devices are shown on this page. Use the toggle bar to test the rest of
your devices.
IMPORTANT: If you notice one of your devices does not respond to the
power command, make a note—you will need to change the power command
you give to that device.
Under your last device, there’s is an on-screen OK button. Select OK to
continue with the test.
3 Test the “Good Night” activity with your devices.
12:35
DirecTV Satellite Box
Onkyo DVD
Sony TV
12:35
OK
Harmon/Kardon
Audio
12:35
Press the power
button on the next
page to turn off or
on your devices in
this activity.