Mallory Ignition Lakewood TRACTION BARS 20189 - Manual (Page 2)

LAKEWOOD IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP
10601 MEMPHIS AVE. #12, CLEVELAND, OH 44144 • 216.688.8300 • www.mrgasket.com
FORM 97140189
09/04
Made in U.S.A.
Printed in U.S.A.
Your rear suspension can be fine tuned for street or
strip. For a good ride, the snubber air gap should be
increased. For a firm competition ride, the snubber air
gap can be decreased. If vehicle torque steers (pulls to
left or right) under acceleration (due to the traction bars),
the snubber air gap can be adjusted to eliminate this
problem.
NOTE: For best results on most vehicles, passenger side
snubber air gap should be less than the drivers side air gap.
After proper adjusting has been completed, your
Lakewood traction bars will be a definite advantage in
all of your acceleration contests.
Be sure to keep this instruction sheet for future reference.
Replacement Snubbers are available for your traction
bars from your local Lakewood retailer.
CATALOG #20530 – Rubber Snubbers (2/set)
CATALOG #20538 – Urethane Snubbers (2/set)
For the ultimate in traction performance, use Lakewood
Drag Shocks. Whether its Professional Competition,
Street/Strip, Pro Street, Street Machine or a Muscle Car,
Lakewood has the shock you need. Lakewood Drag
Shocks will provide superior operation over any other
Drag Shock on the market today. See your local
Lakewood retailer for application and price information.
A highly trained Technical Service Department is maintained by Lakewood Industries to answer your technical
questions, provide additional product information and offer various recommendations. See your local retailer of
Lakewood products for specific prices.
For beat results, Technical Service calls, correspondence and warranty questions should be directed to the following
address:
Lakewood Industries Phone: 216.688.8300
10601 Memphis Ave. #12 8:30 A.M. - 5:00 P.M. EST
Cleveland, OH 44144 www.mrgasket.com
TUNING TIPS
TECHNICAL SERVICE