Altec Lansing 220 User Manual
Page 4
4
Troubleshooting Tips
Total System Power:
10 Watts (5 Watts RMS)
Frequency Response:
70 Hz – 18 kHz
Signal to Noise Ratio @ 1 kHz input:
>70 dB
Crossover Frequency:
150 Hz
System THD (distortion):
< 0.15 % THD @ -10 dB full-
scale input voltage
Input Impedance:
10k ohms
SATELLITE AMPLIFIED SPEAKERS
Drivers (per satellite): One 3" full-range driver
POWER REQUIREMENTS
USA/Canada/and applicable
120 V AC @ 60 Hz 0.3A
Latin American countries:
Europe/United Kingdom;
230 V AC @ 50 Hz 0.15A
applicable Asian countries;
Argentina, Chile and Uruguay:
ETL / cETL / CE / NOM / IRAM Approved
The answers to most setup and performance questions can be found in
the Troubleshooting guide. You can also consult the FAQs in the
customer support section of our Web site at www.alteclansing.com. If
you still can’t find the information you need, please call our customer
service team for assistance before returning the speakers to your
retailer under their return policy.
Customer service is available 7 days a week for your convenience. Our
business hours are:
Monday to Friday: 8:00 a.m. to 12:00 midnight EST
Saturday & Sunday: 9:00 a.m. to 5:00 p.m. EST
1-800-ALTEC-88 (1-800-258-3288)
Email: [email protected]
For the most up-to-date information, be sure to check our Web site at
www.alteclansing.com.
© 2002 Altec Lansing Technologies, Inc.
Designed and engineered in the USA and manufactured in our ISO9002
certified factory. United States Patents 4429181 and 4625328 plus other
patents pending.
System Specifications