Mallory Ignition ACCEL CHEVROLET APPLICATIONS (including LT-1) 74022 - Manual (Page 16)

ACCEL/DFI ACCEL/DFI
29
6AN to 3/8"
Compression
3/8 Braided Line
ACCEL Part# 74710
Fuel Pump Bracket
ACCEL Fuel Pump
Part# 74702
6AN Braided Line
Fitting
ACCEL Part# 74721
3/8 Braided Line
3/8 Inlet on Fuel Rail
TPI Fuel Rail Fitting Package
ACCEL Part# 74730
3/8 SAG/GAN 5/16 SAG/GAN
ACCEL Part# 74720
E.F.I. Filter
5/16 Braided Line
6AN Braided Line
5/16 Return Line on Fuel
Pressure Regulator
6AN tp 5/16" Compression
5/16" Return
Line to Tank
To Fuel Tank
Figure G
28
5/16 Fuel Return Line Must Be
Added to Non-Fuel Injected
Vehicles. See Installation
Manual for Proper Installation
Braze Tube to Flange
making Sure Not to
Melt any Rubber or
Plastic Components
Existing Wire Harness
High Pressure Feed
Vapor Vent
Emissions/Canister
Top of Tank
Bottom of Tank
Return Line
2"
Figure H
Stock Exhaust Manifold Style
Header Style
Weld All Around
Figure I
3/8 Feed From
Fuel Line
5/16 SAG to 6AN
5/16 SAG to 6AN
NOTE: If using ACCEL Pump Part #74701, please contact ACCEL/DFI Technical Service for proper plumbing instruction.