Micromod Micro-DCI: 53HC2600 LoopMaster SL6000 CONFIGURATION TOOLKIT - Manual (Page 21)

53HC2600 INSTRUCTION MANUAL
Installation 13
• When the Installation is Complete window appears, click on the OK button.
• At this point the Notepad application opens and a LoopMaster Read Me file appears
containing LoopMaster release information. When you have finished reading this docu-
ment, close Notepad using the Close button in the upper right-hand corner of the window.
• Any windows remaining open may be closed, if desired, using the Close button in the
upper right-hand corner.
• When the Read-Me file window is closed, a window appears asking if the the computer
should be rebooted. Click the Yes button to have the system recognize the new software.
• This completes the setup process.
2.2 Uninstalling LoopMaster Under Windows 3.1 or
Windows 95.
Use this procedure to remove the LoopMaster software and its associated files from your system.
1. Delete the LOOPMSTR subdirectory. This is the subdirectory where Setup installed
LOOPMSTR.EXE
and all associated files. Deleting this subdirectory tree purges most of
LoopMaster from your system.
2. If LOOPMSTR was ever started, LoopMaster created an INI file in your Windows directory.
Delete LOOPMSTR.INI from your Windows directory.
3. Since it is possible to store LoopMaster database files anywhere on your system, delete any
*.S6D
files not in the LOOPMSTR directory.
4. From Program Manager, select and minimize the LoopMaster group, then press the Delete
key. It is not necessary to delete each individual icon to delete the group.