Micromod MOD: Modcell 2050R Mounting Dimensions - Manual

Printed in U.S.A. ©, 2005, MicroMod Automation, Inc.
All dimensions in inches.
Not for construction unless certified.
MD-R-2050-1 Issue 4 Sheet 1 of 1
Cat. No.
Cust. No. MicroMod Automation No.
Also Refer to Dwgs.
Certified by Date
MODCELL 2050R or 2051R
Single Loop Controller
MOUNTING DIMENSIONS
MicroMod Automation
Drawing applies only to following Cat. Nos.:
2050R * * * * * * A
2051R * * * * * * A
* can be any digits.
Note: 1. When mounting housing in panel cutout or rack and panel mounted bezel, turn retaining screws until point of screw
touches rear of panel or bezel. Overtightening of retaining screws will distort housing. Housing must be square after
retaining screws are tightened.
2. MODCELL 2051R does not use the gasket and has a bezel width of 2.735" (69.47mm). The panel cutout may be the
same as for the 2050R.
Instrument Power (6th Character):
A = 20 to 50 Vdc
Z = 85 to 250 Vac