Minuteman MPV-31 Wide Area Vac - Manual (Page 6)

Parts and Instruction Manual
Page 2
Operating Instructions
Inspection
Carefully unpack and inspect your machine for shipping damage. Each unit is tested and thoroughly
inspected before shipment, and any damage is the responsibility of the delivering carrier who
should be notified immediately. Read all instructions carefully before operating.
WARNING
To avoid electric shock, use indoors only.
• Electrical motors can cause explosions when operating near explosive materials or vapors.
Do not operate this machine near flammable materials such as solvents, thinners, fuels,
grain dust, etc.
Electrical - 115 Volt
This machine is designed to operate on a standard 15 amp. 115 volt, 60 hz, AC circuit. Voltages
below 105 volts AC or above 125 volts AC could cause serious damage to the motor.
Electrical - 240 Volt
This machine is designed to operate on a standard 16 amp. type L fused 230 volt, 50 hz, AC
circuit. Voltages below 200 volts AC or above 250 volts AC could cause serious damage to the
motor. I.E.C. Class 1.
Grounding Instructions
To protect the operator from electrical shock, this machine must be grounded while in use. This
machine is equipped with an approved three-conductor power cord and grounding type plug to fit
the proper grounding type receptacle.
This machine is for use on a nominal 120-volt circuit and has a grounding plug that looks like the
plug illustrated in sketch A. Make sure that the machine is connected to an outlet having the same
configuration as the plug. No adapter should be used with this machine.
For equipment rated 150-250 volts: If the machine is provided with an attachment plug as shown
in sketch below, it is intended for use on a 240 volt (nominal circuit.) No adapter is available for
this plug.