Minuteman 290 Series Tip N Pour - Manual (Page 6)

Parts and Instruction Manual
Page 3
USER MAINTENANCE INSTRUCTIONS
All service and repair should be performed by qualified vacuum service representative or electrician.
No user serviceable components are employed in the electrical vacuum lid head assembly. No
lubrication of the motor is required.
CLOTH BAG & HOSE ASSY
Cloth bag and hose assy are user maintenance items and can be replaced when worn out. Cloth
bags can be maintained by blowing dust off the bag and then laundered. Cloth bags should be
completely dried before reinstalling into machine. For optimum performance, empty and clean
filter bag regularly. A clogged and dirty bag restricts the flow of air and results in reduced vacuum.
For liquid pickup, remove the dry dust filter bag. Check the automatic shut-off to be certain it is
working properly. The hose assy can be maintained by wiping off with a dampened cloth of mild
liquid soap and water, then allowed to dry.
CORD STORAGE
While not in use storage can be accomplished by winding cord around motor lid assy. Cord
should be completely unwound from lid assy during operation.
• Do not use with damaged cord of plug. If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped in water, return to service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
Always unplug the machine when removing the motor head off the tank. This equipment should
be stored indoors and not exposed to rain.