Minuteman E20 Walk-Behind Scrubber Traction Drive Cylindrical Deck - Manual (Page 22)

22
Machine Overview
The pump and solution solenoid, which shuts off solution flow when the bail handle is released, are protected from debris by the in-line filter
assembly. The filter assembly is located at the front of the machine above the brush deck. It is important to check and clean the screened
washer inside the assembly regularly to ensure proper solution flow. After shutting off solution flow, unscrew the assembly (Note that the cone
of the washer is facing away from the pump). Remove washer and rinse, reinsert and screw assembly together, tightening by hand. Overtightening
with tools may damage the plastic threads.
A Fitting, MGHT
B Screened Washer
C Hose Barb Insert
D Fitting, FGHT
In-Line Solution Filter Assembly