Minuteman Kleen Sweep 25W (625821) - Manual (Page 20)

20
Maintenance and Service
5 Maintenance and
Service
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the machine is always ready to be
put into operation.
Maintenance and repair work neces-
sary on a daily and weekly basis can be
carried out by an operator trained to
complete the work, all other
Minuteman
system maintenance may only be com-
pleted by personnel who are
correspondingly qualified and trained.
Please contact your nearest
Minuteman
service center or Minuteman authorized
dealer. Failure to observe this annuls any
rights to claims under the terms of
guarantee in respect of resulting damage
or consequential damage.
Always specify the serial number in the
case of inquiries and spare parts or-
ders, refer to section 1.7 - Rating plate.
5.1 Minuteman system maintenance
The
Minuteman system maintenance:
• ensures that the
Minuteman machine
is always ready for operation (pre-
ventive maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the machine has a long ser-
vice life.
Minuteman system maintenance provides
individual modules explaining the special
technical work to be carried out and
prescribes the intervals at which the
work should be performed. Parts to be
replaced for the individual maintenance
tasks are defined and provided in spare
parts kits.
Minuteman system maintenance, cus-
tomer
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating
manual (daily and weekly). The driver/
operator receives proper instruction
when the machine is delivered.
Minuteman system maintenance I:
(every 125 operating hours)
Completed by technical experts from an
authorized
Minuteman service center in
accordance with the specific machine sys-
tem maintenance using spare parts kits.
Minuteman system maintenance II:
(every 250 operating hours)
Completed by technical experts from an
authorized
Minuteman service center in
accordance with the specific machine sys-
tem maintenance using spare parts kits.
Minuteman system maintenance III/S:
(every 500 operating hours, safety
check)
Completed by technical experts from an
authorized
Minuteman service center in
accordance with the specific machine sys-
tem maintenance using spare parts kits.
Completion of all legally prescribed,
safety-related tests in accordance with
UVV-BGV-TÜV-VDE