Read all instructions before using warning, Warning, Save these instructions – Minuteman C42000-FMP (115V) (3 Speed) User Manual

Page 3

Advertising
background image

1

FOR COMMERCIAL USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the
following:

READ ALL INSTRUCTIONS BEFORE USING

WARNING

- To reduce the risk of fire, electric shock, or injury:

• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

WARNING

To avoid electrical shock, do not use outdoors. Do not operate in standing water.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,

damaged, left outdoors, or dropped into water, return it to a service center. If the cord is damaged,
it must be replaced by the manufacturer or its service agent or a similarly qualified person in order
to avoid a hazard.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp

edges or corners. Do not run appliance over cord.

• Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint,

hair, and anything that may reduce airflow.

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where

they may be present.

• Connect to a properly grounded outlet only. See grounding instructions.

• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control

device.

• Unplug the machine from the power supply before servicing, such as cleaning and routine

maintenance.

SAVE THESE INSTRUCTIONS

Advertising
This manual is related to the following products: