Minuteman E26ECO_H26ECO Walk-Behind Scrubber Traction Drive Disc Deck - Manual (Page 25)

25
Machine Overview
If streaks are present, despite an optimum
angle adjustment, the clearance between the
caster wheels and floor must be adjusted by
changing the number of washers underneath
the bracket that holds the wheel. The
squeegee height is preset at the factory to
3mm.
In cases of very smooth floors, e.g. finished
floors, PVC, linoleum, etc., see 2mm
illustration for washer configuration.
In cases of very uneven floors, e.g. poorly laid
tiles (water does not run off) ,, configure as
shown in 4mm illustration.
Keep the extra washers by
installing them above the bracket
as shown.
Squeegee Blades
Height Adjustment
3 mm
2 mm 4 mm