Minuteman C82904-07 Micro Vacuum - Manual (Page 4)

3
WARNING
This vacuum may contain potentially hazardous dust depending on its application. Special handling
of contaminated disposal bags and filters is recommended. Disposal must be in compliance with
local EPA regulations
USER MAINTENANCE INSTRUCTIONS
All service and repair should be performed by qualified vacuum service representative or electri-
cian. No user serviceable components are employed in the electrical vacuum lid head assembly. No
lubrication of the motor is required.
CLOTH BAG & HOSE ASSEMBLY
Cloth bag and hose assembly are user maintenance items and can be replaced when worn out. For
optimum performance, empty and clean filter bag regularly. A clogged and dirty bag restricts the flow
of air and results in reduced vacuum. The hose assembly can be maintained by wiping off with a
dampened cloth of mild liquid soap and water, then allowed to dry.
CORD STORAGE
While not in use storage can be accomplished by winding cord around motor lid assembly. Cord
should be completely unwound from lid assembly during operation.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return to service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Always unplug the machine when removing the motor head off the tank. This equipment should
be stored indoors and not exposed to rain.
Always unplug the machine when removing the motor head off the tank. This equipment should be
stored indoors and not exposed to rain.