Mirion Technologies GMP-15-3 Beta Probes User Manual

Health physics

Advertising
background image

health physics

A Mirion Technologies Division

 

¡

¢

£

¤

¥

¦

§

¨

©

GMP-11-3 & GMP-15-3 External Probes

for RDS-31S/R Survey Meter

FEATURES

complete range of smart probes to enhance the

•

detection capabilities of the RADOS RDS-31S/R survey
meters
remote pulse rate measurements

•

converts the meter into contamination monitor

•

sensitive for low levels of alpha, beta and gamma

•

radiation
for general contamination and frisking

•

optional telescopic rod

•

cord lengths up to 15 meters upon request

•

GMP-11-3 & GMP-15-3

External Probes for RDS-31S/R survey meter

These external probes enhance the detection

capability of the RADOS RDS-31 survey meter .They

have been designed to fulfi ll both the civil defense

and industrial applications requirements.

The GMP-11-3/15-3 probes are intended for

monitoring alpha, beta, gamma and X-ray

radiation. The GMP-11-3/15-3 is used as

external probe for the RDS-31S/R Multi-Purpose

Survey Meter . The GMP-11-3/15-3 probe is con-

nected to an external binder connector interface at

the bottom of the RDS-31.

The probe can be attached to or removed off the

meter without any need to switch off the meter fi rst.

The RDS-31 automatically recognizes the connected

external probe type and switches to corresponding

display unit.

If the RDS-31 meter is switched off when the probe

is connected to it, the probe is detected by the me-

ter at the start-up when the meter is switched on.

The probes can be used as hand-held or as fi xed

probes.

Advertising
This manual is related to the following products: