Acer AT2001 - Manual (Page 21)

21
5-4 Connecting a VCR Using Coaxial (RF)
1. Connect the “output to TV” (RF out or Antenna out) jack on the back of
your VCR to the TUNER (UHF/VHF-CATV) jack on the back of your LCD TV
with the supplied RF lead.
2. Turn on your LCD TV (see 4-4 Turning ON the Power ), then press the
INPUT button repeatedly to select TV.
3. If you have a broadcast antenna or cable box, connect your broadcast
antenna or cable TV coaxial (RF) cable to the UHF/VHF connector on the
back of your VCR.
WARNING! If an outdoor antenna or cable system is connected to your LCD
TV, make sure that the antenna or cable system is correctly
grounded.