Acer PH530 - Manual (Page 15)

 ... English
Introduction
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for ad-
justing the image height.
To raise the image:
1. Press the elevator button  .
2. Raise the image to the desired height and angle  , then
release the button to lock the elevator foot into position.
3. Use  to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the el-
evator feet into position.
3. Use  to fine-tune the display angle.
Tilt Adjusting Wheel 3 Elevator Foot
Elevator Button
2
1