Airlink101 AWLL6077 - Manual (Page 5)

The Adapter may automatically detect the Network Authentication and the Data
encryption. You need to enter the security settings in the appropriate boxes
according to the settings of the router and then click OK to connect.
Please refer to the User’s Manual on the provided CD for instructions on
configuring the wireless network security settings.
Step 2.3
The connection is now established. Click on the Wireless Monitor
utility icon to check the status of the connection. The Status should be
Associated, and there will be green bars next to Signal Strength and Link
Quality.
Troubleshooting
If you are experiencing problems with the connection (unable to connect, low
signal strength, slow connection speed, not working, unstable wireless
connection) you may want to tune your router’s signal by changing the
channels on the router and/or by adjusting the direction of the antenna(s).
You do not need to change the channel on the Adapter; it will automatically pick
up the new channel after you reboot the router.
Your router has 11 different channels to choose from. Start from channel 1 and
work your way up. Each time you change the channel on the router, make sure
that you restart the computer that is connected to the router before trying to
connect again. Keep going through the channels until you find one that gives
you a stable connection.
For instructions on changing channels, refer to the documentation that comes
with the router.