Safety instructions tracker management by sms – MIDLAND Geopoint Voice LCD User Manual
Page 39
![background image](/manuals/338554/39/background.png)
38
Safety Instructions
Tracker Management by SMS
38
Writing Commands
Command
Meaning and Values
Example
wposc
Set the cyclic position SMS in text format and the
relevant power save mode.
[enabling: 0=disable, 1=enable]
[rate: 01÷99 minutes]
[power save mode: 0=disable, 1=enable]
NOTE: the power save mode works only with
SMS rate
5 minutes.
Never set like this: wposc=0,xx,1
NOTE: to enable or disable only the cyclic position
SMS, send the wposc command with the fi
rst
fi eld only. In this case, the previously set rate is
considered.
Case A
Command:
wposc=1,01,0
Reply:
wposc=1,01,0 OK
Description:
1=enables the cyclic position SMS
01=1 minute rate
0=disables the power save mode
Case B
Command:
wposc=1
Reply:
wposc=1 OK
Description:
1=enables the cyclic position SMS with
the previous set rate
wms
Set the accelerometer values.
[sensitivity: 00=disables sensor, 01=maximum,
10=minimum]
[timeout: 01÷99 minutes]
Command:
wms=02,10
Reply:
wms=02,10 OK
Description:
02=sensitivity level 2
10=10 minutes timeout