Light and sound signals, Unit functions – MIDLAND BT Ski User Manual
Page 13

UK
13
LIGHT AND SOUND SIGNALS
LED indication
Status
GENERAL
None
Unit is switched off or full charged when connected to the
power supply
Single Blue flash every 3 seconds
Unit being turned on/ Unit in working mode
Triple red flash
Unit being turned off
Single Red flash every 3 seconds
Standby - low battery
RED and BLUE (together) every 3 se-
conds
Active (Intercom, phone call or Bluetooth connection in
progress)
RED and BLUE (together) and one flash
of RED light every 3 seconds
Active but low battery
Single red flash every 2 seconds
Unit in charge when connected to the power supply
SETUP
Steady Red
Setup mode
Rapid Red-Blue alternating flash
Pairing mode (searching for devices)
Steady Blue for two second
Successful pairing/ Reset paired devices
Audio signals
Status
Ascending tone (low-high)
Unit being turned on
Descending tone (high-low)
Unit being turned off
Enable/Disable the Intercom
1 tone = enabled / 2 tones = disabled
1 tone
Specific feature turned on
2 tones
Specific feature turned off
UNIT FUNCTIONS
If you want to...
…do this
GENERAL
Turn on the unit
Press the Control button for 3 seconds at least (start Blue
flash)