Initiating the pairing process, Wearing the – MIDLAND BT Sport User Manual

Page 9

Advertising
background image



ENGLISH

devices can be reconnected without needing to complete the pairing process

again.

The headset can store pairing information for 8 different Bluetooth devices.

Initiating the pairing process

1. Please place the headset close to the Bluetooth device you wish to pair

with.

2. Make sure the headset is turned on and in standby mode (the LED indicator

will flash green once every 3 seconds).

3. Hold the Talk Button for approximately 7 seconds until the LED indicator

begins to flash red and green. The headset is now ready to be paired with

the Bluetooth mobile phone

4. Operate the mobile phone and go through the steps of searching for nearby

Bluetooth devices.

I

Please refer to the operating guide of the Bluetooth mobile phone to

perform Bluetooth pairing procedure.

5. When the Bluetooth mobile phone has detected the headset, the LCD

screen on the mobile phone will display ‘Midland BTS’.

6. Follow the instructions on the Bluetooth mobile phone to complete

the headset pairing. When the mobile phone prompts for a pin code or

password enter: 0000.

7. If pairing is not completed within 60 seconds, please repeat the steps

described above. The screen on the Bluetooth mobile phone will display

the pairing status.

8. When pairing is successful, the screen on the Bluetooth mobile phone will

display a pairing successful message and the LED indicator on the headset

will flash green 10 times, then the headset will enter standby mode.

9. Now the headset is successfully paired and ready to make and receive

calls.

Wearing the

BT Sport

The headset is designed for 180° rotation to provide a comfortable fit for

users, who won’t feel any discomfort even after a few hours of usage. Please

use the headset according to the following directions:

1. Please confirm your neck size; refer to the packaging for the appropriate

neckband sizes

2. Please refer to the directions given in the figure for how the headset should

be worn.

Jaw bone

Microphone position area.

Position in this area to

transmit voice clearly.

Deeper dark colour for better

voice results.

istr_BT sport.indd 9

21-03-2007 15:50:38

Advertising