MIDLAND CT 200_400 - Manual (Page 4)

E
N
G
L
IS
H
4
Main indicators/controls - description
Power/volume on-off To.turn.on/off.the.radio.and.adjust.the.volume.level.
Sending indicator
Press.the. PTT .is.pressed,.it.glows.to.indicate.the.transmitting.
status..
Busy indicator
When. the. channel. is. busy,. the. display. shows.
PTT key When.pressed,.it.enables.the.transmission.
MONI (monitor) key
Hold down this key in receiving mode: the channel in use will
be.monitored..The.busy.channel.indicator.will.glow..
Call key To.call.your.partner
To exit the menu and to switch from VFO to Memory mode.
.
Socket and connector
SMA Connector For.connecting.the.supplied.antenna
Speaker/microphone
jack
If you want to use a speaker or a microphone, connect
them to this socket. If not, prevent water from dropping into
it.