MIDLAND CT 210_410 - Manual (Page 9)

E
N
G
L
IS
H
9
Delete a memory
1.Delete one stored channel
. In. .Mode.turn.off.the.power.
. Hold. down. the. . key. and. turn. on. the. unit. “DEL?”.
and. the. stored. channel. number. will. be. displayed.. Turn.
the. Encoder. knob. or. select. the. channel. to. delete.. Push.
.until.“YES?” appears.on.the.display;.push.it.again.to.
confirm.
2. Reset (Delete all the settings in Frequency mode)
. Hold. down. the. . button. and. turn. on. the. unit. until.
“RESET?”.is.displayed..Press. .until.“VFO?”.is.shown.
on.the.display;.push.it.again.for.confirmation..
3. Delete all settings
. Hold.down. .and.turn.on.the.unit.until.“VFO?”.is.shown.
on.the.display..Turn.the.Encoder.knob.to.select.“FULL?”,.
then.press. .to.delete.all.the.settings.in.Frequency.and.
VFO.modes.