MIDLAND Neptune 100 - Manual (Page 3)

3
ENGLISH
1. ABOVE ALL... SAFETY!
1.1 Symbols used
For ease and convenience of viewing, NEPTUNE 100 uses symbols to highlight urgent situations,
practical advice, and general information.
Warnings such as this, shown using an open hand symbol, indicate a crucial description 
regarding technical repairs, dangerous conditions, safety warnings, advice and/or
important information. Ignoring these symbols may result in serious problems and/or
damage and/or personal injury.
Notes such as this one indicate practical advice that we suggest be followed for optimal

performance with NEptuNE 100.
1.2 Warnings
1.2.a General
This device has been tested for compliance with Class D digital marine device limits. These 
limits were created to allow for reasonable protection against damaging interference.
This device is to be used solely as an aid to navigation. Its settings may be influenced by 
diverse factors, such as defects or malfunction of the device, environmental conditions
or improper use.
It is the user’s responsibility to observe reasonable prudence and judgement in 
navigation, and as such this device should not be considered a substitute for this
reasonable prudence and judgement.
Do not open the radio for any reason! NEPTUNE 100’s precision mechanics and electronics 
require expertise and specialized equipment; for the same reason, the radio should
under no circumstances be realigned as it has already been calibrated for maximum
performance. Unauthorized opening of the transceiver will nullify the warranty.
1.2.b Radiofrequency/installation
Midland recommends following the requirements for prevention of radiofrequency 
exposure. Unauthorized changes or modifications to this device may invalidate
conformity to the ETSI Regulations.
This VHF DSC transceiver generates and irradiates electromagnetic energy (EME) at 
radiofrequency (RF), and as such must be installed and placed in operating conditions
that are in conformity with the instructions contained in this manual and with current
regulations. Not following these instructions can cause personal injury and/or malfunction
of the device.
Do not use NEPTUNE 100 before connecting a suitable antenna that is in perfect working 
condition – although NEPTUNE 100 is protected, this may seriously damage the stages
of transmission power.
Do not use transmit before ensuring proper connection of the antenna. During 
transmission, remain at a minimum distance of 1mt from the antenna.
1.2.c Automatic Transmitter Identification System (ATIS)
Your marine transceiver may activate, if necessary, the ATIS function. The ATIS function 
may be activated when using the transceiver within the internal navigable waters of
Europe which require the automatic transmission of identification. For further details,
please contact your local authorities.