MIDLAND RG2 User Manual

Page 12

Advertising
background image

Page 12

4.5 Installation of the antenna/electromagnetic exposure

For optimal radio settings and minimal user exposure to electromagnetic radio
frequency energy, ensure that:

•

The antenna is connected to the transceiver and is properly installed.

•

The antenna is situated away from people and is positioned at least three feet
from the transceiver and microphone.

•

The connector is a standard PL259 (male UHF).

4.6 Mounting of Microphone

To install the microphone mount, look first for a mounting point close to the
transceiver. The distance between the transceiver and the wall mount must be less
than the length of the microphone cable.

I

Do not pull excessively on the microphone cord.
This part is important to the correct operation of
the radio: over time, pulling may damage the cord
and impede the user from transmitting.

Advertising