MPM MPR-02 - Manual (Page 12)

12
GB
UNIT'S DESCRIPTION
1. Switch ON/OFF
2. Ceramic plates
3. Clamping element
4. LED temperature display
5. Temperature regulation buttons
6. Button releasing the clamping element
7. Button launching the straightener’s function
8. A button launching the curler’s function
9. Control light – unit plugged
10. Rotary cable
11. A hanger
- temperature range min.-max (120-200'C)
HOW TO USE
STRAIGHTENER
1. Plug the unit, a green control light indicating the unit is plugged shall light up (9).
2. Use the ON (1) button to switch the unit on. After switching on the unit start heating up to the
maximal temperature 200'C. Heating up process is signalized by blinking LED diodes on the
display (4). Select a required temperature due to temperature regulation buttons (5).
3. At the moment the unit reaches a required temperature the LED diodes shine yellow.
4. Press the button launching the straightener’s function (7).
5. Set lower temperatures in case of thin hair, dyed or damaged hair. Set medium temperatures in
case of wavy hair. Set high temperature in case of thick hair, very thick or naturally curled hair.
6. Start from the peak of head, take some hair (approx. 5 cm wide) and insert the hair between
ceramic plates pushing the button releasing the clamping element (6). Move the unit from hair
bulbs to their ends. Avoid contact between head or hands and hot plates. Rotary cable (10)
enhances comfort of operation.
7. Repeat the above-described operation for all hair. Wait until hair has cooled down before brushing
out.
8. After use of the unit is over, switch the unit off using the OFF button (1). Unplug the unit and wait
until it cools down.
9. After cooling down wipe the unit out using a wet cloth. Do not use chemical agents.


 
1
 10
11


2