Multichannel Systems MEA-System Manual - Manual (Page 28)

5.2.3 Stimulus Generators
Product Product Number Description
2-Channel stimulus
generator STG4002
4-Channel stimulus
generator STG4004
8-Channel stimulus
generator STG4008
4000 series: General-purpose stimulus generator
for current and voltage-driven electrical stimulation,
with integrated stimulus isolation unit for each
output channel. Operating in download and
streaming mode (continuous down streaming of
pulses from connected computer). MC_Stimulus II
program with advanced features.
5.2.4 MEA Amplifiers
Product Product Number Description
MEA amplifier for Inverted
microscopes MEA1060-Inv
MEA amplifier for upright
microscopes MEA1060-Up
Probe interface and 60 channel pre- and
filter amplifier with custom gain and
bandwidth.
MEA amplifier with blanking
circuit for Inverted microscopes MEA1060-Inv-BC
MEA amplifier with blanking
circuit for upright microscopes MEA1060-Up-BC
Probe interface and 60 channel pre- and
filter amplifier with custom gain and
bandwidth. The blanking circuit prevents
the amplifier from getting saturated and
thus prevents stimulus artifacts.
5.2.5 Accessories
Product Product
Number Description
Peristaltic Perfusion
System PPS2 The peristaltic pump PPS2 with software control is
developed for the perfusion of biological samples.
Magnetic Perfusion
Holder MPH The magnetic perfusion holder is for fixing the perfusion
cannula PH01.
Holder with M3 threads MPM3 For fixing tools with M3 threads next to the MEA.
1-Channel temperature
controller TC01
2-Channel temperature
controller TC02
PID based technology, set-point temperature reached fast
within 30 s to 5 minutes, control temperature range from
ambient temperature to +50 °C.
Perfusion cannula PH01 Temperature can be programmed with the temperature
controller TC01 or TC02.
Digital in / out extension Di/o For connecting other devices to single digital input and
output channels via BNC connectors (up to 16 inputs and
16 outputs), for example for synchronizing stimulation
and recording, or for applying feedback.
External power supply
PS40W with 40 W power
and ±7 V output voltage PS40W External power supply for supplying power to MEA1060
amplifiers and / or other peripheral devices.