AVerMedia Technologies AVERDIGI EB3004 MD - Manual (Page 31)

27
OSD MENU Description
MAIN MENU
CAMERA/RECORD
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
SYSTEM
EVENT SETUP
Configure alarm, sensor, and motion.
EVENT SETUP
ALARM SETTING
SENSOR SETTING
MOTION DETECTION
ALARM SETTING
Configure parameters of alarm.
ALARM CONTINUOUSLY
ALARM PERIOD
ALARM TYPE
SELECT / DESELECT ALL
SENSOR
RECORD
MOTION DETECTION
VIDEO LOSS
HDD FAIL
005 SEC
ALARM SETUP
1 2 3 4
ALARM TYPE
Select the way of alarming – RECORD, BUZZER, or RELAY.
ALARM PERIOD
Set the amount of time (in second) to sending the alarm once
triggered.
ALARM CONTINUOUSLY
Set the amount of time (in second) to continue sending the
alarm once triggered.
SELECT/DESECLECT ALL
To enable/disable all below selections.
SENSOR
Enable/disable to send out the alarm when sensor has been
triggered.
MOTION DETECTION
Enable/disable to send out the alarm when motion has been
detected
VIDEO LOSS
Select the channel that will send out the alarm when video is
lost.
HDD FAIL
Enable/disable to send out alarm when hard disk is failed.