Diamond Products CC4144D (3 Speed) - Manual (Page 42)

in accordance with the chart below.
Lubricate PTO bearings and shaft splines with a high quality grease such as Mobil HTS
NOTE:
Ensure the pipe plug is removed prior to greasing the bearings to prevent
failure of the bearing seals. Reinsert the plug when grease flows out the hole.
1 PTO Bearings 4 Pumps every 25 hours
2 PTO Shaft Splines 2 Pumps every 25 hours
PTO Lubrication
1/16" NPTF Pipe Plug Grease Fitting for PTO Shaft Splines
Grease Fitting for PTO Bearings
42